HENZ Generator Controller
TabrizAzma company as a subsidiary company of the Santal Holding, could managed to make a strong market position due to its leading-edge products.
HENZ TG100 is a microprocessor-based generator controller which transfers the load between the Mains and the Generator automatically and manually, monitors single or 3 phase Mains voltage and current and checks for system failures.
IT has some special features like a big LCD display, automatic change-over, Sampling all 3 CT simultaneously and etc.
HENZ TG100 has 3 main operating modes : Automatic, Test, OFF. Which you can set your desired operation mode via the buttons located on the front panel. For instance in the automatic mode, in case mains failure the controller will start the generator automatically and the load will be transmitted. In this operation mode, after the controller started the generator it checks the determined time period through “ Circuit Breaker Delay “ and controls all the failures of the system.
In “ TEST “ mode, the genset controller will start the generator and in the meantime the contactors will be controlled through MC & GC buttons.in this operation mode, despite existence the Mains, the generator will be started by the controller.
In “ OFF “ mode, HENZ TG100 will start the cool-down operation and then will be turn off. If the operator presses the Off button twice, the generator will be turn off without “ cool-down “ operation.
By entering to the “ MENU “ section of the controller, the operator can change and save any parameter. This feature of the HENZ TG100 allows it to be easily adapted to any generator without the necessity for a separate unit.
TabrizAzma Company has introduced this significantly high-quality Controller to the market with 24 months of guarantee.
Lets check out some of significant features of HENZ TG100 :
Inputs / Outputs | Alarms |
· 3 phase Mains and Generator voltage inputs | · Generator Self-start Alarm |
· 3 phase alternator current input | · Low Engine RPM Alarm
· High Engine RPM Alarm |
· 12V or 24V power supply | · Low Generator Voltage Alarm
· High Generator Voltage Alarm |
· water temperature analog inputs | · Generator Over Current Alarm |
· Oil pressure analog inputs | · Low Battery Voltage Alarm
· High Battery Voltage Alarm |
· fuel level analog inputs | · Low Mains Voltage Alarm
· High Mains Voltage Alarm |
· DC supply input | · DC supply low voltage alarm |
· Start remote digital input | · High Engine temperature Alarm |
· Emergency Stop digital input | · Low Oil Pressure Alarm |
· Crank relay output | |
· Fuel solenoid relay output |